Omschrijving:
– De inlaatslang is bijzonder nuttig voor motoren met verbeterde prestaties omdat deze versterkte siliconenslang niet samentrekt zoals de originele slang. Zo wordt prestatieverlies effectief voorkomen.
– De aansluiting op de massaluchtstroomsensor heeft ø 70mm binnendiameter.
– Om bijvoorbeeld de VR6-massaluchtstroomsensor, of eventueel S3 LMM met 80mm buitendiameter op een 1.8t te gebruiken, kun je voor de aanpassing de volgende onderdelen gebruiken:

– Siliconen slang verloopstuk 80x70mm
– 2x slangklemmen

– 1x aluminium buisverbinder ø 70mm

Technische gegevens:
–  4 lagen
–  ca. 5mm
– Temperatuurbereik -40 tot +180°C
– Max. druk tot ca. 5 bar

Geschikt voor:
– Audi/Seat/VW 1.8T motoren AGU/AVC/APH/AUY/ATC/AJQ/ 150-180 pk

Het bericht K04-001 intake slang 50mm naar 70mm MAF verscheen eerst op Celtemp Services.

Dimensions (total): 730x300x100mm, with inlet and outlet re-welded to one side of the device.

Inlet and outlet diameter: 76 mm. The intercooler can be installed in the engines, the power of which does not exceed 650 BHP.

The performance of the core is remarkable and the thick walls made of superb quality polished aluminum grant exceptional durability, perfect cooling, and effective air flow (in contrast to the intercoolers installed in delivery vans, the inlet is unlikely to be clogged). The offered product is a perfect replacement to the stock intercoolers, increasing the performance of the car by boosting engine power and torque. The intercooler is a perfect solution for all the cars, in the case of which the turbocharger and exhaust manifold piping are located on the same side of the car. Our intercoolers are the only ones in Europe, the efficiency of which has been checked up to 10 bar – they are capable of withstanding such a high pressure without any damages or distortions. Unlike similar intercoolers available on the another tuning e-shops, all of the products offered by our company incorporate new, notably more efficient, second type cores! In the case of the older cores (on the right), there was a large gap between the consecutive fins. What is more, the fins were installed in a single row (while looking at the inlet, it was possible to see the outlet as well). The aforementioned design features resulted in poor cooling, as the temperature of air flowing through it was not decreased to a satisfactory extent. New intercoolers offered by our company are equipped with fins that are installed in a dense manner, therefore massively increasing the cooling capabilities! What is more, the external radiator presented above has incised (ventilated) fins, thanks to which the heat loss is much quicker.

Het bericht Intercooler 600x300x100mm verscheen eerst op Celtemp Services.

Het bericht Intercooler 330x280x76mm verscheen eerst op Celtemp Services.

Dimensions (total): 580x300x76mm, with inlet and outlet re-welded to one side of the device.

Inlet and outlet diameter: 76 mm.

The intercooler can be installed in the engines, the power of which does not exceed 380 BHP. The performance of the core is remarkable and the thick walls made of superb quality polished aluminum grant exceptional durability, perfect cooling, and effective air flow (in contrast to the intercoolers installed in delivery vans, the inlet is unlikely to be clogged). The offered product is a perfect replacement to the stock intercoolers, increasing the performance of the car by boosting engine power and torque. The intercooler is a perfect solution for all the cars, in the case of which the turbocharger and exhaust manifold piping are located on the same side of the car. Our intercoolers are the only ones in Europe, the efficiency of which has been checked up to 10 bar – they are capable of withstanding such a high pressure without any damages or distortions. Unlike similar intercoolers available on the another tuning e-shops, all of the products offered by our company incorporate new, notably more efficient, second type cores! In the case of the older cores (on the right), there was a large gap between the consecutive fins. What is more, the fins were installed in a single row (while looking at the inlet, it was possible to see the outlet as well). The aforementioned design features resulted in poor cooling, as the temperature of air flowing through it was not decreased to a satisfactory extent. New intercoolers offered by our company are equipped with fins that are installed in a dense manner, therefore massively increasing the cooling capabilities! What is more, the external radiator presented above has incised (ventilated) fins, thanks to which the heat loss is much quicker.

Het bericht Intercooler 450x300x76mm verscheen eerst op Celtemp Services.

Dimensions (total): 730x300x76mm, with inlet and outlet re-welded to one side of the device.

Inlet and outlet diameter: 76 mm.

The intercooler can be installed in the engines, the power of which does not exceed 550 BHP. The performance of the core is remarkable and the thick walls made of superb quality polished aluminum grant exceptional durability, perfect cooling, and effective air flow (in contrast to the intercoolers installed in delivery vans, the inlet is unlikely to be clogged). The offered product is a perfect replacement to the stock intercoolers, increasing the performance of the car by boosting engine power and torque. The intercooler is a perfect solution for all the cars, in the case of which the turbocharger and exhaust manifold piping are located on the same side of the car. Our intercoolers are the only ones in Europe, the efficiency of which has been checked up to 10 bar – they are capable of withstanding such a high pressure without any damages or distortions. Unlike similar intercoolers available on the another tuning e-shops, all of the products offered by our company incorporate new, notably more efficient, second type cores! In the case of the older cores (on the right), there was a large gap between the consecutive fins. What is more, the fins were installed in a single row (while looking at the inlet, it was possible to see the outlet as well). The aforementioned design features resulted in poor cooling, as the temperature of air flowing through it was not decreased to a satisfactory extent. New intercoolers offered by our company are equipped with fins that are installed in a dense manner, therefore massively increasing the cooling capabilities! What is more, the external radiator presented above has incised (ventilated) fins, thanks to which the heat loss is much quicker.

Het bericht Intercooler 600x300x76mm verscheen eerst op Celtemp Services.

Dimensions (total): 420x300x76mm, with inlet and outlet re-welded to one side of the device.

Inlet and outlet diameter: 76 mm.

The intercooler can be installed in the engines, the power of which does not exceed 350 BHP. The performance of the core is remarkable and the thick walls made of superb quality polished aluminum grant exceptional durability, perfect cooling, and effective air flow (in contrast to the intercoolers installed in delivery vans, the inlet is unlikely to be clogged). The offered product is a perfect replacement to the stock intercoolers, increasing the performance of the car by boosting engine power and torque. The intercooler is a perfect solution for all the cars, in the case of which the turbocharger and exhaust manifold piping are located on the same side of the car. Our intercoolers are the only ones in Europe, the efficiency of which has been checked up to 10 bar – they are capable of withstanding such a high pressure without any damages or distortions. Unlike similar intercoolers available on the another tuning e-shops, all of the products offered by our company incorporate new, notably more efficient, second type cores! In the case of the older cores (on the right), there was a large gap between the consecutive fins. What is more, the fins were installed in a single row (while looking at the inlet, it was possible to see the outlet as well). The aforementioned design features resulted in poor cooling, as the temperature of air flowing through it was not decreased to a satisfactory extent. New intercoolers offered by our company are equipped with fins that are installed in a dense manner, therefore massively increasing the cooling capabilities! What is more, the external radiator presented above has incised (ventilated) fins, thanks to which the heat loss is much quicker.

Het bericht Intercooler 300x300x76mm verscheen eerst op Celtemp Services.

Dimensions (total): 560x180x65mm, with inlet and outlet re-welded to one side of the device.

Inlet and outlet diameter: 63 mm.

The intercooler can be installed in the engines, the power of which does not exceed 200 BHP. The performance of the core is remarkable and the thick walls made of superb quality polished aluminum grant exceptional durability, perfect cooling, and effective air flow (in contrast to the intercoolers installed in delivery vans, the inlet is unlikely to be clogged). The offered product is a perfect replacement to the stock intercoolers, increasing the performance of the car by boosting engine power and torque. The intercooler is a perfect solution for all the cars, in the case of which the turbocharger and exhaust manifold piping are located on the same side of the car. Our intercoolers are the only ones in Europe, the efficiency of which has been checked up to 10 bar – they are capable of withstanding such a high pressure without any damages or distortions. Unlike similar intercoolers available on the another tuning e-shops, all of the products offered by our company incorporate new, notably more efficient, second type cores! In the case of the older cores (on the right), there was a large gap between the consecutive fins. What is more, the fins were installed in a single row (while looking at the inlet, it was possible to see the outlet as well). The aforementioned design features resulted in poor cooling, as the temperature of air flowing through it was not decreased to a satisfactory extent. New intercoolers offered by our company are equipped with fins that are installed in a dense manner, therefore massively increasing the cooling capabilities! What is more, the external radiator presented above has incised (ventilated) fins, thanks to which the heat loss is much quicker.

Het bericht Intercooler 450x180x65mm verscheen eerst op Celtemp Services.

Dimensions (total): 660x180x65mm

With inlet and outlet re-welded to one side of the device. Inlet and outlet diameter: 63 mm.

The intercooler can be installed in the engines, the power of which does not exceed 250 BHP.

The performance of the core is remarkable and the thick walls made of superb quality polished aluminum grant exceptional durability, perfect cooling, and effective air flow (in contrast to the intercoolers installed in delivery vans, the inlet is unlikely to be clogged). The offered product is a perfect replacement to the stock intercoolers, increasing the performance of the car by boosting engine power and torque. The intercooler is a perfect solution for all the cars, in the case of which the turbocharger and exhaust manifold piping are located on the same side of the car, as it is in the case of Alfa Romeo 147, 156, Fiat Bravo, Brava, Marea, etc. Our intercoolers are the only ones in Europe, the efficiency of which has been checked up to 10 bar – they are capable of withstanding such a high pressure without any damages or distortions. Unlike similar intercoolers available on the another tuning e-shops, all of the products offered by our company incorporate new, notably more efficient, second type cores! In the case of the older cores (on the right), there was a large gap between the consecutive fins. What is more, the fins were installed in a single row (while looking at the inlet, it was possible to see the outlet as well). The aforementioned design features resulted in poor cooling, as the temperature of air flowing through it was not decreased to a satisfactory extent. New intercoolers offered by our company are equipped with fins that are installed in a dense manner, therefore massively increasing the cooling capabilities! What is more, the external radiator presented above has incised (ventilated) fins, thanks to which the heat loss is much quicker.

Het bericht Intercooler 550x180x65mm verscheen eerst op Celtemp Services.

Het bericht Intercooler 280x300x76mm verscheen eerst op Celtemp Services.

Het bericht Intercooler 550x230x65mm One-side verscheen eerst op Celtemp Services.