MuchBoost IS38 380

Upgraded turbocharger with an estimated ~380HP at the crank. List of modifications:

• Upgraded journal bearing system that allows the turbo to hold more boost.

MuchBoost IS38 460

Upgraded turbocharger with an estimated ~460HP at the crank @1.6Bar. The bearings are also upgraded with this option. List of modifications:

• Precisely machined seal plates and compressor housing,
• More efficient and larger Billet Compressor Wheel 6+6 blades,
• Enlarged and Lightened High-Flow 8 blade Turbine Wheel,
• Genuine IHI IS38 compressor housing,
• Genuine IHI IS38 exhaust manifold,
• Genuine IHI IS38 bearing housing,
• Original actuator and diverter valve,
• The compressor and turbine wheels are balanced separately, and then the whole core is high-speed balanced using VSR balancing machines at speeds similar to the level seen in the vehicle.

Muchboost IS38 500

Upgraded turbocharger with an estimated potential of ~500HP at the crank @2.2Bar. Modifications compared to the 460 option are the same, except:

• even larger Billet Compressor Wheel,
• larger 9 blade Turbine Wheel to provide much more flow and lower exhaust temperatures with higher boost,

• Muchboost IS38 550+

  Upgraded Turbocharger with an estimated potential of ~550+HP at the crank @ 2.2Bar. Modifications compared to the 500 option are the same except:

  • even larger 7+7 blades Billet Compressor Wheel.

  Other Significant Modifications

  To fully utilize the potential of this hybrid turbo, we recommend upgrading i.a. fuel, exhaust, cooling systems, and the clutch. Individual ECU remapping is the foundation.

Het bericht MQB IS38 Hybrid Turbo Upgrade VW Golf VII R, Seat Leon Cupra, Audi S3 8V verscheen eerst op Celtemp Services.

The turbo delivers up to 204% power (128 extra HP) over the factory specs. It is a great choice for someone looking for a bit extra HP from their daily driver. MuchBoost turbo allows you to get more from your engine and enjoy it even more than you’ve been so far.

We have developed 3 modification options that allow you to reach anywhere from 210HP to 250HP.

MuchBoost EA111 210

Upgraded turbocharger with an estimated ~210HP at the crank. List of modifications:

• Upgraded journal bearings system that allows the turbo to hold more boost,
• Genuine actuator
• More efficient and larger Billet Compressor Wheel,
  
• Genuine Clipped and Lightened Turbine Wheel,
• Genuine Mitsubishi compressor housing,
• Genuine Mitsubishi bearing housing,
• Genuine Mitsubishi exhaust manifold,
• Dynamically balanced,
• The compressor and turbine wheels are balanced separately, and then the whole core is high-speed balanced using VSR balancing machines at speeds similar to the level seen in the vehicle.

MuchBoost EA111 230

Upgraded turbocharger with an estimated potential of ~230HP at the crank. Modifications compared to the 210 option are the same except:

• Bigger Compressor Billet Wheel,
• Bigger Turbine Wheel,
• Precisely machined exhaust housing.

MuchBoost EA111 250

Upgraded turbocharger with an estimated potential of ~250HP at the crank. Modifications compared to the 230 option are the same except:

• Bigger Compressor Billet Wheel,
• High-Flow 9 Blades Turbine Wheel.

Other significant modifications

The turbo is meant to work with ~220-250HP In order to reach that level of power, you need to adjust your fuel, exhaust, intake, and cooling systems as well. For this turbo to work correctly you will also need to get an EBC (external boost controller) installed. 

Example project

A great example of our turbo at work is a VW Jetta with 204HP and 328Nm of torque. Dyno graph below.

A set of gaskets is included with every option you choose!

Het bericht EA111 1.4TSI Hybrid Turbo Upgrade VW Golf VI CAXA, CNVA verscheen eerst op Celtemp Services.

The turbo delivers up to 197% power (84 extra HP) over the factory specs. It is a great choice for someone looking for a bit extra HP from their daily driver. MuchBoost turbo allows you to get more from your engine and enjoy it even more than you’ve been so far.

Main Features

• The potential 170HP,
• Fast spool thanks to Custom Billet Compressor Wheel,
• Clipped and Lightened Turbine Wheel,
• High air-fuel ratio including high peak torque achieved at low engine speeds.
• Tuning remap is needed

Details on the construction of the turbo:

• Genuine Mahle/Mitsubishi compressor housing,
• Genuine Mahle/Mitsubishi exhaust manifold,
• Genuine Mahle/Mitsubishi bearing housing,
• Original Mahle/Mitsubishi actuator,
• Upgraded Journal bearing system that allows holding more boost,
• Dynamically balanced,
• The compressor and turbine wheels are balanced separately, and then the whole core is high-speed balanced using VSR balancing machines at speeds similar to the level seen in the vehicle.

Other significant modifications

The turbo is meant to work with ~170HP In order to reach that level of power, you need to adjust your fuel, exhaust, systems as well.

A set of gaskets is included with the turbo!

(If your engine has a different code, please send us a message. We will verify it.)

Het bericht EA111 1.2TSI Hybrid Turbo Upgrade CBZ verscheen eerst op Celtemp Services.