The turbo delivers up to 229% power (158 extra HP) over the factory specs. It is a great choice for someone looking for a bit extra HP from their daily driver. MuchBoost turbo allows you to get more from your engine and enjoy it even more than you’ve been so far.

We have developed 3 modification options that allow you to reach anywhere from 220HP to 280HP.

MuchBoost EA211 1.4TSI 220

Upgraded turbocharger with an estimated ~220HP at the crank. Listo of modifications:

• Precisely machined seal plates and compressor housing,
• Genuine IHI/Mitsubishi compressor housing,
• Genuine IHI/Mitsubishi bearing housing,
• Genuine IHI/Mitsubishi exhaust manifold,
• Upgraded journal bearings system that allows the turbo to hold more boost,
• More efficient and larger Billet Compressor Wheels:6+6 blades for IHI
  8+0 blades for Mitsubishi
• Clipped and Lightened genuine Turbine Wheel to help reduce backpressure,
• The compressor and turbine wheels are balanced separately, and then the whole core is high-speed balanced using VSR balancing machines at speeds similar to the level seen in the vehicle.

MuchBoost EA211 1.4TSI 250

Upgraded turbocharger with an estimated potential of ~250HP at the crank. Modifications compared to the 220 option are the same except:

• Larger High-Flow 9 blades Turbine Wheel,
• Precisely machined exhaust housing.

MuchBoost EA211 1.4TSI 280

Upgraded turbocharger with an estimated potential of ~280HP at the crank. Modifications compared to the 250 option are the same except:

• Additionally enlarged Compressor Wheel,
• Additionally larger High-Flow 9 blades Turbine Wheel.

Other Significant Modifications

To fully utilize the potential of this hybrid turbo, we recommend upgrading i.a. fuel, exhaust, cooling systems, and the clutch. Individual ECU remapping is the foundation.

A set of gaskets is included with every option you choose!

Het bericht EA211 Hybrid Turbo Upgrade 1.4TSI Volkswagen Caddy, Golf MK7, Seat Leon 5FB, Skoda Octavia III verscheen eerst op Celtemp Services.

Muchboost IS38 2.0TSI Hybrid Upgraded Turbocharger with a Custom Compressor Billet Wheel 6+6 or 7+7 blades and Enlarged High-Flow 8 or 9 blade Turbine Wheel (depending on the option). It is based on an original IHI turbocharger, which means that installation is 100% P&P. The turbocharger is meant to work with Audi S3 8V, Seat Leon Cupra, and VW Golf VII GTI/R with the 2.0TFSI 265HP-310HP engines.

The turbo delivers great power characteristics and has something to offer for anyone that’s interested in gaining more power from their daily driver or trying to get maximum performance from their fun weekend car. You don’t have to worry about being taken over anymore.

We have developed 3 modification options that allow you to reach anywhere from 380HP to 550+HP.

MuchBoost IS38 380

Upgraded turbocharger with an estimated ~380HP at the crank. List of modifications:

• Upgraded journal bearing system that allows the turbo to hold more boost.

MuchBoost IS38 460

Upgraded turbocharger with an estimated ~460HP at the crank @1.6Bar. The bearings are also upgraded with this option. List of modifications:

• Precisely machined seal plates and compressor housing,
• More efficient and larger Billet Compressor Wheel 6+6 blades,
• Enlarged and Lightened High-Flow 8 blade Turbine Wheel,
• Genuine IHI IS38 compressor housing,
• Genuine IHI IS38 exhaust manifold,
• Genuine IHI IS38 bearing housing,
• Original actuator and diverter valve,
• The compressor and turbine wheels are balanced separately, and then the whole core is high-speed balanced using VSR balancing machines at speeds similar to the level seen in the vehicle.

Muchboost IS38 500

Upgraded turbocharger with an estimated potential of ~500HP at the crank @2.2Bar. Modifications compared to the 460 option are the same, except:

• even larger Billet Compressor Wheel,
• larger 9 blade Turbine Wheel to provide much more flow and lower exhaust temperatures with higher boost,

Muchboost IS38 550+

Upgraded Turbocharger with an estimated potential of ~550+HP at the crank @ 2.2Bar. Modifications compared to the 500 option are the same except:

• even larger 7+7 blades Billet Compressor Wheel.

Other Significant Modifications

To fully utilize the potential of this hybrid turbo, we recommend upgrading i.a. fuel, exhaust, cooling systems, and the clutch. Individual ECU remapping is the foundation.

Het bericht MQB IS38 Hybrid Turbo Upgrade VW Golf VII R, Seat Leon Cupra, Audi S3 8V verscheen eerst op Celtemp Services.

The turbo delivers up to 166% power (160 extra HP) over the factory specs. It is a great choice for someone looking for a bit extra HP from their daily driver. MuchBoost turbo allows you to get more from your engine and enjoy it even more than you’ve been so far.

Main Features

• The potential ~400HP,
• Fast spool thanks to Custom Billet Compressor Wheel,
• Enlarged Turbine Wheel,
• High air-fuel ratio including high peak torque achieved at low engine speeds.

Details on the construction of the turbo:

• Machined KKK seal plate and compressor housing,
• Genuine KKK exhaust manifold,
• Genuine KKK bearing housing,
• Precisely machined exhaust housing,
• Reinforced actuator,
• Upgraded Journal bearing system that allows holding more boost,
• Dynamically balanced,
• The compressor and turbine wheels are balanced separately, and then the whole core is high-speed balanced using VSR balancing machines at speeds similar to the level seen in the vehicle.

Other significant modifications

The turbo is meant to work with ~400HP In order to reach that level of power, you need to adjust your fuel, exhaust, and cooling systems as well. A Diverter Valve K04 relocation kit is required additionally to install this turbocharger.

A set of gaskets is included with the turbo!

Het bericht 2.0TFSI Hybrid Turbo Upgrade K04 064 VW Golf VI GTI, Scirocco, SKODA Octavia CCZA, CAWB, CCZB verscheen eerst op Celtemp Services.

The turbo delivers over 151% of stock power (135HP extra) which means it could be perfect for a faster daily driver, to gain some additional power.

Main Features

• The potential +420HP,
• Fast spool thanks to Custom Billet Compressor Wheel,
• High-Flow Enlarged Turbine Wheel,
• High air-fuel ratio including high peak torque achieved at low engine speeds.

Details on the construction of the turbo:

• Modified KKK genuine compressor housing and seal plate,
• Genuine KKK bearing housing,
• Reinforced actuator,
• Precisely machined genuine KKK exhaust housing,
• Upgraded Journal bearing system that allows holding more boost,
• The compressor and turbine wheels are balanced separately, and then the whole core is high-speed balanced using VSR balancing machines at speeds similar to the level seen in the vehicle.

Other significant modifications

The turbo is meant to work with +420HP In order to reach that level of power, you need to adjust your fuel, exhaust, and cooling systems as well.

Example project

One of our clients managed to produce 390HP and 520Nm of torque with their Skoda Octavia. The car was also equipped with:

• Milltek Sport Sport Non-Resonated Catback exhaust,
• Vis motorsport EA888 gen2 HPFP upgrade,
• Catless downpipe,
• CTS Turbo Intake kit,
• Upgraded Intercooler,
• DV relocation kit,
• CCC Motorsport Upgrade Clutch Kit.

Dyno graph below

A set of gaskets is included with the turbo!

Het bericht 2.0TFSI K04 064 Hybrid Turbo Upgrade 420HP Audi S3, TT, Seat Leon, VW Golf, Scirocco verscheen eerst op Celtemp Services.

Beschrijving:

– De turbo is past in de lengterichting motoren Audi / Seat / VW zoals Audi A4 B5 1.8T/ Passat 3B 1.8T. De turbo past 1:1 en word vervangen voor de originele turbo. Alle aansluitingen zijn als origineel, behalve dat de turbo-inlaat 56mm is..

Om een ​​vermogen van ca. 300 pk te bereiken, moet het volgende worden geïnstalleerd:
Aanzuigtip van siliconen met 56 mm inlaat, injectie 380ccm/440ccm green giants, intercoolerkit liefst front mount, 76 mm downpipe en 63,5mm uitlaatsysteem. 0,7bar Wastegate, Met de juiste afstelling is 300pk mogelijk.

Er wordt op gewezen dat tijdens het vervangen van de turbo de olietoevoer- en retourleidingen moeten worden vervangen. Deze zijn verkrijgbaar bij uw VAG-dealer.

– Compressorwiel 60>46,5 mm gemaakt van gefreesd aluminium blok

– Turbine wiel 50>42mm (origineel 45>42mm)

– Openingsdruk wastegate ca. 0,5 bar (sterkere wastegate 0,7 bar is verkrijgbaar)

Geschikt voor:

– Audi A4 1.8T met motorcode AEB,APU,ARK, ANB, AJL, BFB, BEX, AVJ

– Audi A6 1.8T met motorcode AEB,APU,ARK,ANB,AJL,AWT

– Passat 1.8T met motorcode AEB, APU, ARK, ANB, AWT

Het bericht Celtemp K04-015 Turbo 300PK+ verscheen eerst op Celtemp Services.

Beschrijving:

– De turbo is past in de lengterichting motoren Audi / Seat / VW zoals Audi A4 B5 1.8T/ Passat 3B 1.8T. De turbo past 1:1 en word vervangen voor de originele turbo. Alle aansluitingen zijn als origineel, behalve dat de turbo-inlaat iets groter is.

Om een ​​vermogen van ca. 240 pk te bereiken, moet het volgende worden geïnstalleerd:
Aanzuigtip van siliconen met 50 mm inlaat, injectie 380ccm/440ccm green giants, intercoolerkit liefst front mount, Min. 63,5 mm downpipe en uitlaatsysteem. Met de juiste afstelling is 240pk mogelijk.

Er wordt op gewezen dat tijdens het vervangen van de turbo de olietoevoer- en retourleidingen moeten worden vervangen. Deze zijn verkrijgbaar bij uw VAG-dealer.

Geschikt voor:

– Audi A4 1.8T met motorcode AEB,APU,ARK, ANB, AJL, BFB, BEX, AVJ

– Audi A6 1.8T met motorcode AEB,APU,ARK,ANB,AJL

– Passat 1.8T met motorcode AEB, APU, ARK, ANB, AWT

– Ook voor kleine turbo-conversies tot 1,8L zoals G40, Fiat Punto enz

Het bericht Celtemp K04-015 Turbo 240PK+ verscheen eerst op Celtemp Services.

– Upgrade turbocharger K04-001 voor 1.8 20VT dwarsliggende motoren tot 300pk compressorwiel 60>46.5mm

Beschrijving:

– De turbo wordt 1:1 vervangen voor de originele turbo. Met een grotere Aanzuigtip, Grotere intercooler, 76mm downpipe, Injectoren (bv 440cc green giants), en software aanpassing is tot 300pk mogelijk. Het compressorwiel is gefreesd uit aluminium en meet 60>46,5 mm. De compressor inlaat is 50mm, hiervoor moet een grotere aanzuigtip gebruikt worden (S3 silicone tip). Turbine wiel heeft de afmetingen 50>42mm zoals de originele K04-023 Turbo.

– Fijn uitgebalanceerd

– Turbine wiel 50>42mm (origineel 45>40mm)

– Compressorwiel 60>46,5mm (origineel 54>39,5mm)

– Versterkte wastegate. Openingsdruk 0,7 bar houddruk ca. 1,8 bar

Er wordt op gewezen dat tijdens het vervangen van de turbo de olietoevoer- en retourleidingen moeten worden vervangen. Deze zijn verkrijgbaar bij uw VAG-dealer.

Geschikt voor:

– Audi TT 8N 150-180 pk AGU, ARZ, ARX, AUM, AQA, AJQ, APP, ARY, AUQ

-Audi A3 8L 150pk-180pk

– Seat Ibiza 6k 1.8T Cupra + Cupra R 156-180pk

– Seat Ibiza 6L FR 1.8T 150pk

– Seat Ibiza 6L Cupra 1.8T 180PK

– Seat Leon 1M1 1.8T 180 pk FWD

– Skoda Octavia I 1.8T 1u 150-180pk

– VW Golf 4 1.8T 150PS-180PS AGU, ARZ, AUM, AUQ

– VW Polo 1.8T 9N3 met motorcode BJX en BBU

Het bericht Celtemp K04-001 Turbo 300PK verscheen eerst op Celtemp Services.

– Upgrade turbocompressor K04-001 plug and play 1.8 20VT

Beschrijving:

– De turbo wordt 1:1 vervangen voor de originele turbo. De turbo inlaat is 50mm, hiervoor moet een grotere aanzuigtip worden gebruikt.
Met een grotere intercooler, 76mm downpipe, en software aanpassing is het mogelijk om 260PK+ te maken. Het compressorwiel is 54> 42 mm. Het turbinewiel heeft de afmetingen 50>42 mm zoals de originele K04-023 Turbo.

Er wordt op gewezen dat tijdens het vervangen van de turbo de olietoevoer- en retourleidingen moeten worden vervangen. Deze zijn verkrijgbaar bij uw VAG-dealer.

Technische specificaties:

– Olie- en watergekoeld

– Interne wastegate

– Turbinerotor shaped

– Turbine wiel 50>42mm 12 schoepen (maat is gelijk aan de 023 turbo)

– Compressorwiel 54>42mm 6+6 schoepen (maat is gelijk aan de 023 turbo)

Geschikt voor:

– Audi TT 8N 150-180 pk AGU, ARZ, ARX, AUM, AQA, AJQ, APP, ARY, AUQ

-Audi A3 8L 150pk-180pk

– Seat Ibiza 6k 1.8T Cupra + Cupra R 156-180pk

– Seat Ibiza 6L FR 1.8T 150pk

– Seat Ibiza 6L Cupra 1.8T 180PK

– Seat Leon 1M1 1.8T 180 pk FWD

– Skoda Octavia I 1.8T 1u 150-180pk

– VW Golf 4 1.8T 150PS-180PS AGU, ARZ, AUM, AUQ

– VW Polo 1.8T 9N3 met motorcode BJX en BBU

Het bericht Celtemp K04-001 Turbo 260PK verscheen eerst op Celtemp Services.